HP Model 715/100 hp 9000 series 700 model 715 workstations service handbook (a - Page 115
Slide Bucket into, Channels of, Connector Slot, Align Standoffs and, Holes on Adapter, Board and CPU
View all HP Model 715/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Slide the connector bucket, which you attached to the EISA board, partway into the channels of the connector slot on the rear of the system unit (see Figure 5-30). Align the connector on the adapter board with the connector on the processor board, and carefully press the two connectors together. Ensure that the standoffs are aligned with the holes in the processor board. Press on both the connector bucket and the adapter board to secure the assembly to the system unit. Make sure that the audio cable is routed, as shown in Figure 5-30. Slide Bucket into Channels of Connector Slot Insert Connector on Adapter Board Here Align Standoffs and Holes on Adapter Board and CPU Board Figure 5-30. Inserting the EISA Assembly into the System Unit 5-30 Field Replaceable Units