HP Model 715/100 hp 9000 series 700 model 715 workstations service handbook (a - Page 50
Save the changes and close the file.
View all HP Model 715/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3. Enter the following command line to set the attributes of the device file: chmod 666 /dev/crt24 Return 4. Make a backup copy of /usr/lib/X11/X0screens by entering the following command line: cp /usr/lib/X11/X0screens /usr/lib/X11/X0screens.backup Return 5. Use a text editor, such as vuepad or vi, to edit the following file: /usr/lib/X11/X0screens 6. Edit the file so that every line begins with a pound sign (#). 7. Add the following line to the file exactly as shown: /dev/crt24 8. Save the changes and close the file. 9. Enter the following command: /etc/reboot Return 10. The system shuts down and starts to reboot. Press and hold Esc when the following message is displayed: Selecting a system to boot. To stop selection process press and hold the ESCAPE key. In a few seconds, the following message appears: Terminating selection process. A short time later, the following message appears: Searching for potential boot devices. To terminate search, press and hold the ESCAPE key. Configuration 3-19