HP Model 715/100 hp 9000 series 700 model 715 workstations service handbook (a - Page 55
Troubleshooting
View all HP Model 715/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Troubleshooting 4 This chapter provides information about isolating a failing Field Replaceable Unit (FRU). To troubleshoot HP workstations, you must be familiar with the HP-UX operating system. You must be able to start and stop processes. You should also be familiar with the Boot ROM Test Mode, ISL diagnostics, and the SupportWave online tests. For Series 700 systems, note any error or status messages, and then run the power-up boot ROM diagnostics, known as Self Test. If the Self Test diagnostics fail, replace the FRU that is indicated. If the tests pass but you still suspect a problem, run the ISL diagnostics and the SupportWave online tests. Refer to the following sections for more information about Self Test. For a complete description on using ISL diagnostics and SupportWave, see the Precision Architecture RISC HP 9000 Series 700 Diagnostics Manual. Troubleshooting 4-1