HP PageWide Managed P75050 User Guide - Page 53
Tips for selecting and using paper, To load letterhead or preprinted forms with ALM disabled
View all HP PageWide Managed P75050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2. Complete the steps in Load Tray 1, Load Tray 2, Load lower 550-sheet trays, or Load HCI trays. To load letterhead or preprinted forms with ALM disabled 1. Orient the paper as follows for one-sided or two-sided print jobs: ● One-sided: Load the A4/Letter-sized media face-down in the tray, with the top of the form to the back of the tray and the long edges to the side. ● Two-sided: Load the A4/Letter-sized media face-up in the tray, with the top of the form to the back of the tray and the long edges to the side. 2. Complete the steps in Load Tray 1, Load Tray 2, Load lower 550-sheet trays, or Load HCI trays. Tips for selecting and using paper For the best results, observe the following guidelines: ● To prevent jams, poor print quality, and other printing problems, avoid loading the following paper in the tray: - Multipart forms - Media that is damaged, curled, or wrinkled - Media with cutouts or perforations - Media that is heavily textured, embossed, or otherwise difficult to print on - Media that is too lightweight or stretches easily - Media that contains staples or clips ● Load a stack of paper (not just one page). All the paper in the stack should be of the same size and type to avoid a paper jam. ● Load only one type of paper at a time into the tray. ● Load only one size of media at a time into a tray. ENWW Tips for selecting and using paper 41