HP PageWide Pro 777 User Guide - Page 172
Set the fax error report, Fax error messages
View all HP PageWide Pro 777 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
3. Touch Reports , and then touch Fax Reports. 4. Touch the name of the report that you want to print. Set the fax error report A fax error report is a brief report that indicates the product experienced a fax job error. You can set it to print after the following events: ● Every fax error (the factory-set default) ● Send fax error ● Receive fax error ● Never NOTE: With this option, you will have no indication that a fax failed to be transmitted unless you print a fax activity log. 1. On the control panel, touch the Fax icon. 2. In the display, touch the Fax Setup icon. 3. Touch Reports , and then touch Fax Error Reports. 4. Touch to select one of the following: On (Fax Send) On (Fax Receive) On (Fax Send and Fax Receive) Off Prints whenever a transmission error occurs. This is the default setting. Prints whenever a receiving error occurs. Prints whenever a fax error occurs. Does not print any fax error reports. Fax error messages Alert and warning messages appear temporarily and might require you to acknowledge the message by touching the OK button to resume or by touching a cancel button to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the product will attempt to resume printing the job after the warning has appeared for 10 seconds without acknowledgement. ● Communication error. ● Document feeder door is open. Canceled fax. ● Fax is busy. Canceled send. ● Fax is busy. Redial pending. ● Fax storage is full. Canceling the fax send. ● Fax receive error. ● Fax Send error. ● Fax storage is full. Canceling the fax receive. ● No dial tone. ● No fax answer. Canceled send. 156 Chapter 9 Solve problems ENWW