HP PageWide Pro 777 User Guide - Page 55
Load media, Load Tray 1
View all HP PageWide Pro 777 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
I want to... Follow these steps The product then does this... settings of media size and type to match the print job and prints. Print to a specific tray if ● Printer software: Select the tray you want. Prints the job to the selected tray if the media size the media size and type match; if they do not ● Printer configuration: Under Settings, on the and type match. If they do not match, the product queries the other trays and prints from the first one match, print to another Tray Management screen, Use Requested Tray with the correct media size and type. tray. must be set to First. For more information about printer software settings, see To print from a computer (Windows) or To print from a computer (OS X). Load media This section describes how to load portrait-oriented paper into a tray for one-sided printing, which is the factory default. Not all of the following trays or features may be available for your product: ● Load Tray 1 ● Load Tray 2 (single) or Trays 2/3 (tandem) ● Load lower 550-sheet trays ● Load HCI trays ● Load envelopes ● Load letterhead or preprinted forms ● Load the document feeder ● Load the scanner ● Reload the stapler Load Tray 1 Tray 1 is the multipurpose tray at the left side of the product. NOTE: If you are not using Alternate Letterhead Mode (ALM), place the paper as follows for one-sided printing: ● A4/Letter sized: Place portrait-oriented paper with the side to be printed on face-down, with the top edge toward the back of the tray. ● A3/Ledger sized: Place landscape-oriented paper with the side to be printed on face-down, with the top edge toward the left. For ALM orientation, see Load letterhead or preprinted forms. 1. Open Tray 1. ENWW Load media 39