HP Pavilion zt1100 HP Pavilion zt1100/xz200 Series and HP Omnibook xt1500 Note - Page 61
Making Wireless Network Connections selected models
View all HP Pavilion zt1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Modem and Network Connections Making Wireless Network Connections (selected models) Making Wireless Network Connections (selected models) If your notebook includes IEEE 802.11 wireless capabilities, you can connect by radio to a wireless local area network (LAN) and access computers and other resources on the network. A wireless network provides all the functions of a typical "wired" network, but also provides for "roaming." Since your notebook connects to the network by radio rather than through cables, you can move from place to place within the network-from your office to a conference room, for example-and remain on the network the entire time. To prepare for wireless LAN connections Before you can connect your notebook to a particular wireless network, you have to configure the notebook for the specific wireless connection. Connecting to an existing wireless network You can connect to an access point that gives you access to a local area network, or you can connect directly to other computers in an AdHoc network. 1. Right-click the wireless network connection icon in the taskbar, then select View Available Wireless Networks from the pop-up menu. 2. A list of available networks appears. Select the network you want, enter the encryption key if required, and click Connect. If the network you want is not on the list, click Advanced, Configure, and enter the required network parameters. If the network is not using 802.1x authentication protocol, clear the automatic key option. 3. On the General tab, edit network settings as needed for your local network. See your network administrator. You can also display an icon in the taskbar when connected to a network. 4. Click OK to save the configuration. This network is added to your list of preferred networks. The notebook automatically connects to the first preferred network that's within range if wireless communication is turned on-see "To turn wireless LAN communication on and off," below. Reference Guide 61