HP Pavilion zt1100 HP Pavilion zt1100/xz200 Series and HP Omnibook xt1500 Note - Page 92

To replace the system RAM module

Get HP Pavilion zt1100 - Notebook PC PDF manuals and user guides View all HP Pavilion zt1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

Add-On Devices Installing Additional RAM To replace the system RAM module If needed, you can replace your notebook's system RAM module (under the keyboard) to increase the notebook's RAM. You'll need a small Phillips screwdriver and a small flat-blade screwdriver for this procedure. 1. Turn off the notebook: click Start, Turn Off Computer, Turn Off. 2. Important: unplug the AC adapter, if present, and remove the battery. 3. Open the display so that it lays flat. 4. Remove the screws from the back of the display hinge covers. CAUTION 5. Remove the plastic panel above the keyboard (containing the power button and OneTouch buttons). Use a small, flat-blade screwdriver to carefully pry up the right end of the panel above the Page Up key, then lift the end until the panel unsnaps. When removing the panel, be careful not to pull on the cable connecting the panel to the notebook. 6. Carefully lift the panel to unsnap the latches above the middle One-Touch button and the F1 key, then lift the panel an inch or so off of the notebook. 92 Reference Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
Add-On Devices
Installing Additional RAM
92
Reference Guide
To replace the system RAM module
If needed, you can replace your notebook’s system RAM module (under the keyboard) to
increase the notebook’s RAM.
You’ll need a small Phillips screwdriver and a small flat-blade screwdriver for this
procedure.
1.
Turn off the notebook: click Start, Turn Off Computer, Turn Off.
2.
Important:
unplug the AC adapter, if present, and remove the battery.
3.
Open the display so that it lays flat.
4.
Remove the screws from the back of the display hinge covers.
5.
Remove the plastic panel above the keyboard (containing the power button and One-
Touch buttons). Use a small, flat-blade screwdriver to carefully pry up the right end
of the panel above the Page Up key, then lift the end until the panel unsnaps.
CAUTION
When removing the panel, be careful not to pull on the cable connecting the panel
to the notebook.
6.
Carefully lift the panel to unsnap the latches above the middle One-Touch button and
the F1 key, then lift the panel an inch or so off of the notebook.