HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 I - Page 43
Assembling the outer rails (HP 10, 000 series)
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
b. Depending on the rack you are using, complete one of the following tasks: • For an HP 10,000 series, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the left rail. See Figure 10. Figure 10 Assembling the outer rails (HP 10,000 series) SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide 43
43
SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide
b.
Depending on the rack you are using, complete one of the following tasks:
•
For an HP 10,000 series, install two #10-32 x 1/2-inch Phillips pan-head screws
with captive star lock washers and two #10 adapter washers in the upper and
lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers and two #10 adapter washers in
the upper and lower hole locations of the left rail. See
Figure 10
.
Figure 10
Assembling the outer rails (HP 10,000 series)