HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 I - Page 46
Securing the inner rails to the SAN Switch 2/8V with plenum, Plenum, Switch
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
8. Verify that a plenum is installed on the SAN Switch 2/8V, SAN Switch 2/16V or SAN Switch 2/16N models only, as shown in Figure 12. The plenum is an overlay that dissipates the heat generated by the switch, preventing overheating. NOTE: The plenum is a required part of this installation for SAN Switch 2/8V, SAN Switch 2/16V or 2/16N models only, when installed in HP 10,000 series, or System/e racks. 1 2 0013a Figure 12 Securing the inner rails to the SAN Switch 2/8V with plenum The components in Table 12 include: 1 Plenum 2 Switch 46 Installing and configuring
Installing and configuring
46
8.
Verify that a plenum is installed on the SAN Switch 2/8V, SAN Switch 2/16V or SAN
Switch 2/16N models only, as shown in
Figure 12
. The plenum is an overlay that
dissipates the heat generated by the switch, preventing overheating.
NOTE:
The plenum is a required part of this installation for SAN Switch 2/8V, SAN Switch
2/16V or 2/16N models only, when installed in HP 10,000 series, or System/e racks.
Figure 12
Securing the inner rails to the SAN Switch 2/8V with plenum
The components in
Table 12
include:
1
Plenum
2
Switch
0013a
2
1