HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 I - Page 67
SAN Switch 2/8V, 2/16V and 2/16N LED patterns, System and power LED patterns
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
SAN Switch 2/8V, 2/16V and 2/16N LED patterns Table 13, Table 14 and Table 15 summarize LED location, color, and recommended action. System and power LED patterns The system and power LED patterns are shown in Table 13. Table 13 System LED patterns during normal operation LED name, location LED color Status of hardware Recommended action System Status and Power Status At right of serial port on bottom No light Steady green Switch is off, boot is not complete, or boot failed. Verify that switch is on and has completed booting. Switch is on and power supplies No action required. are functioning properly. Slow-flashing green (on 1 second, off 1 second) One or both of the following are true: One or more environmental ranges are exceeded. Error log contains one or more port diagnostic error messages. Check environmental conditions, error log, Port Status LEDs, transceivers, cables, and loopback plugs. Correct error condition. Clear error log. Rerun diagnostics to verify fix. Amber One failed power supply in the SAN Switch 2/16V No action required, but failure of the remaining power supply will cause the switch to fail. SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide 67