HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 I - Page 44
Assembling the outer rails (HP System/e rack), CAUTION
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
• For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the left rail. See Figure 11. Figure 11 Assembling the outer rails (HP System/e rack) 5. The SAN Switch Rack Mount Kit provides different screw types for securing the inner rails. Specific switches require a different number of these screws. See Table 8 to determine the appropriate number of screws. CAUTION: Do not use any screws other than the ones provided. Use of any longer lengths can cause damage to internal components. 44 Installing and configuring