HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 I - Page 55
Creating an Ethernet connection, Connecting the Ethernet cable to the SAN Switch 2/16V
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Creating an Ethernet connection Use these steps to create an Ethernet connection. 1. Connect an Ethernet cable to the Ethernet port and to the workstation or to an Ethernet network containing the workstation as shown in Figure 19. NOTE: Figure 19 shows the SAN Switch 2/16V. This procedure is the same for all SAN Switches. 100-240 VAC 1.0A 47-63Hz IOIOI ! 100-240 VAC 1.0A 47-63Hz 0016a Figure 19 Connecting the Ethernet cable to the SAN Switch 2/16V Once the Ethernet cable is connected, access the switch remotely, via the CLI or the built-in Advanced Web Tools GUI software. 2. Log in to the switch by telnet, using the admin account. SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide 55
55
SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide
Creating an Ethernet connection
Use these steps to create an Ethernet connection.
1.
Connect an Ethernet cable to the Ethernet port and to the workstation or to an Ethernet
network containing the workstation as shown in
Figure 19
.
NOTE:
Figure 19
shows the SAN Switch 2/16V. This procedure is the same for all SAN
Switches.
Figure 19
Connecting the Ethernet cable to the SAN Switch 2/16V
Once the Ethernet cable is connected, access the switch remotely, via the CLI or the built-in
Advanced Web Tools GUI software.
2.
Log in to the switch by telnet, using the
admin
account.
0016a
IOIOI
100-240
100-240
VA
C 1.0A 47-63Hz
C 1.0A 47-63Hz
100-240
100-240
VA
C 1.0A 47-63Hz
C 1.0A 47-63Hz
!