HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 I - Page 81
Table 21 Power supply status LEDs, Number, Description, LED behavior, Meaning, Correction action
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Table 20 SAN Switch 4/32 nonport side LEDs (continued) Number Description 3 Power supply 1 status LED 4 Power supply 1 CAUTION: Disassembling any part of the power supply voids the part warranty and regulatory certifications. There are no user-serviceable parts inside the power supply. . Table 21 describes the power supply status LEDs and corrective actions. Table 21 Power supply status LEDs LED behavior Meaning Correction action No light The power supply is not receiving power or is off. Verify that the power supply is on and seated and that the power cord is connected to a functioning power source. Steady green Power supply is operating normally. No action required. Steady amber for more than five seconds Power supply fault for one of the following reasons: • Power cable is disconnected • Power supply is off • Power supply has failed Try the following: • Check the power cable connection. • Verify that the power supply is powered on. • Replace the power supply. SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide 81