HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 I - Page 84
Table 21, Optional step: issue
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
CAUTION: Do not force the installation. If the power supply does not slide in easily, make sure that it is correctly oriented before continuing. c. Secure the power supply to the chassis by tightening the captive screw using the Phillips-head screwdriver. 7. Plug the power cord into the power supply and press the AC power switch to turn it on. 8. Verify that the LED on the new power supply displays a steady green light while the switch is operating (see Table 21). If the LED is not green, ensure that the power supply is firmly installed. 9. Optional step: issue the psShow command at the CLI prompt to display power supply status. Fabric OS identifies the power supplies in a SAN Switch 4/32 from left to right as PS2 and PS1,as shown in Figure 25. 84 Installing field-replaceable units