HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 118

5 BL-1034 Probable Cause Indicates that the system timed out while waiting for disable messages from the user ports after disabling the ports. Recommended Action Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If the message persists, replace the blade. Refer to the Fabric OS Command Reference for more information on the systemVerification command. Severity CRITICAL BL-1034 Message , [BL-1034], ,, INFO, , Slot FC Initialization completed. Probable Cause Indicates that the indicated slot has completed initializing Fibre Channel (FC) ports. Recommended No action is required. Action Severity INFO BL-1035 Message , [BL-1035], ,, INFO, , Slot iSCSI port Initialization completed. Probable Cause Indicates that the indicated slot has completed initializing specified iSCSI port. Recommended No action is required. Action Severity INFO BL-1036 Message , [BL-1036], ,, CRITICAL, , Faulting 8G blade in slot = due to incompatible stag mode. All EX/VEX ports must be disabled in order to enable the 8G blade in the chassis. Probable Cause In FOS 6.0, 8G blade with legacy mode (EX port having stag) will be disabled. Recommended Disable all EX/VEX ports and perform slotpoweroff/on on the 8G blade. Also, all EX/VEX ports can Action be re-enabled now. Severity CRITICAL 60 Fabric OS Message Reference 53-1001157-01