HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 250

28 FICN-1041 FICN-1041 Message , [FICN-1041], ,, ERROR, , HostTapeEgr:AS Link Level Reject (LRJ) from CU Rx Path= LastCmd=0x LastStatus=0x. Probable Cause Indicates an LRJ received from a device indicates that the CU has lost the logical path to the LPAR. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1042 Message , [FICN-1042], ,, WARNING, , HostTapeIng:FICON Cancel received Path= state=0x. Probable Cause Indicates a job was cancelled during a write pipelining. Recommended If this was an unexpected event (cancel is normally an operator event), contact your vendor's Action customer support for assistance. Severity WARNING FICN-1043 Message , [FICN-1043], ,, ERROR, , HostTapeIng::FICON Selective Reset:Path= state=0x LastCmds=0x LastStatus=0x. Probable Cause Indicates that protocol errors in emulation in the CU or network errors can cause a Selective Reset. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1044 Message Probable Cause , [FICN-1044], ,, ERROR, , HostTapeIng:FICON Selective Reset:Path= Elapsed Time=. seconds. Indicates that protocol errors in emulation in the CU or network errors can cause Selective Reset. 192 Fabric OS Message Reference 53-1001157-01