HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 175

17 EM-1051 EM-1051 Message , [EM-1051], ,, INFO, , : Inconsistency detected, FRU re-initialized. Probable Cause Indicates that an inconsistent state was found in the field-replaceable unit (FRU). This occurs if the state of the FRU was changing during a failover. The FRU is reinitialized and traffic might have been disrupted. Recommended No action is required. Action Severity INFO EM-1055 Message , [EM-1055], ,, WARNING, , : Port media incompatible. Reason: Probable Cause Indicates that an incompatible port media is detected. The possible causes are: • The port media is not capable of running at the configured port speed. • The port media generates too much heat to be used in the slot. Recommended Action Verify that the media can be run at the configured port speed. If the port media is extended long wavelength, move it to a port that can support the heat generated. Severity WARNING EM-1056 Message , [EM-1056], ,, WARNING, , : Port faulted. Reason: . Probable Cause Indicates a faulty port media is detected. The reason code for this message is for internal use only. This message is valid for only the Brocade 4100, 4900, 5000, 7500, and AP7600. Recommended Replace the defective small form-factor pluggable (SFP). Action Severity WARNING EM-1057 Message , [EM-1057], ,, WARNING, , Blade: is getting reset:. Fabric OS Message Reference 117 53-1001157-01