HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 465

Chapter SCN System Messages 74 SCN-1001 Message , [SCN-1001], , FFDC, CRITICAL, , SCN queue overflow for process Probable Cause Indicates that an attempt to write a state change notification (SCN) message to a specific queue has failed because the SCN queue for the specified daemon name is full. This might be caused by the daemon hanging or the system being busy. Some valid values for daemon name are listed below. For a complete listing, see the Introduction to this manual. • fabricd • asd • evmd • fcpd • webd • msd • nsd • psd • snmpd • zoned • fspfd • tsd Recommended Action If this message is caused by the system being busy, the condition is temporary. If this message is caused by a hung daemon, the software watchdog will cause the daemon to dump the core and reboot the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 407 53-1001157-01