HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 346

35 FW-1403 FW-1403 Message , [FW-1403], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has changed from a value outside of the acceptable range to a value within the acceptable range. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1424 Message , [FW-1424], ,, WARNING, , Switch status changed from to . Probable Cause Indicates that the switch status is not in a healthy state. This occurred because of a policy violation. Recommended Run the switchStatusShow command to determine the policy violation. Action Severity WARNING FW-1425 Message , [FW-1425], ,, INFO, , Switch status changed from to HEALTHY. Probable Cause Indicates that the switch status has changed to a healthy state. This occurred because a policy is no longer violated. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1426 Message Probable Cause , [FW-1426], ,, WARNING, , Switch status change contributing factor Power supply: bad, absent. Indicates that the switch status is not in a healthy state. This occurred because the number of faulty or missing power supplies is greater than or equal to the policy set by the switchStatusPolicySet command. 288 Fabric OS Message Reference 53-1001157-01