HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 201

21 FABS-1008 Severity WARNING FABS-1008 Message , [FABS-1008], ,, WARNING, , : Media oid mapping failed Probable Cause Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an internal Fabric OS problem or file corruption. Recommended Reboot or power cycle the switch. Action Severity WARNING FABS-1009 Message , [FABS-1009], ,, WARNING, , : type is not media Probable Cause Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an internal Fabric OS problem or file corruption. Recommended Reboot or power cycle the switch. Action Severity WARNING FABS-1010 Message , [FABS-1010], ,, WARNING, , : Wrong media_event Probable Cause Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message Probable Cause , [FABS-1011], ,, ERROR, , []:Invalid input state 0x Indicates an unrecognized state code was used in an internal Fabric OS message for a FRU. Fabric OS Message Reference 143 53-1001157-01