HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 431

61 PDM-1017 Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1017 Message , [PDM-1017], , FFDC, CRITICAL, , System (): . Probable Cause Indicates the specified system call failed. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PDM-1019 Message , [PDM-1019], ,, WARNING, , File path or trigger too long. Probable Cause Indicates one line of the pdm.conf file is too long. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1020 Message , [PDM-1020], ,, WARNING, , Long path name (/), Skip. Probable Cause Indicates the specified file path name is too long. The maximum character limit is 49 characters. Recommended Use path names not exceeding 49 characters in length for the files to be replicated. Action Severity WARNING PDM-1021 Message , [PDM-1021], ,, WARNING, , Failed to download area port map. Fabric OS Message Reference 373 53-1001157-01