HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 623

Chapter AUDIT SEC System Messages 98 SEC-3001 Message AUDIT, , [SEC-3001], INFO, SECURITY, , , , Event: , Status: success, Info: Security mode on the fabric. Probable Cause Indicates the security mode of the fabric was either enabled or disabled. Recommended Action Verify the security mode change was planned. If the security mode change was planned, no action is required. If the security mode change was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-3002 Message AUDIT, , [SEC-3002], INFO, SECURITY, , , , Event: , Status: success, Info: . Probable Cause Indicates the specified security event has occurred. The Event Name can be one of the following: • There has been an fabric configurations server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non-FCS password has changed. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-3003 Message Probable Cause AUDIT, , [SEC-3003], INFO, SECURITY, , , , Event: , Status: success, Info: Created policy, with members . Indicates a new security policy was created with entries. Note: If you use a wildcard (for example, an asterisk) in creating a policy, the audit report displays the wildcard in the event info field. Fabric OS Message Reference 565 53-1001157-01