HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 90

2 AG-1027 Probable Cause Indicates there are insufficient resources. Recommended Action Run configure CLI on AG switch and increase the number of allowed logins on this port. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1027 Message , [AG-1027], ,, WARNING, , Unable to handle this login request on port because NPIV capability is not enabled on this port. Probable Cause Indicates NPIV is not enabled. Recommended Run portcfgnpivport CLI on the AG switch and enable the NPIV capability on this port. Action Severity WARNING AG-1028 Message , [AG-1028], ,, WARNING, , Device with Port WWN tried to perform fabric login through port , without having access permission. Probable Cause Indicates the device does not have login access for that port, as per ADS policy set by the user. Recommended Add the device in to the ADS allow list for that port using ag --adsadd command. Action Severity WARNING AG-1029 Message , [AG-1029], ,, INFO, , F_Port to N_Port mapping has been updated for N_Port . Probable Cause Indicates that the F_Ports mapped to an N_Port have changed and the config file has been updated. Recommended No action is required. Action Severity INFO 32 Fabric OS Message Reference 53-1001157-01