HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 257

28 FICN-1067 Probable Cause Indicates an internal resource limit has been encountered such that additional control block memory could not be allocated. Recommended This is an unexpected event, either the maximum number of emulation devices are already in use Action or there is an internal memory leak, contact your vendor's customer support for assistance. Severity WARNING FICN-1067 Message , [FICN-1067], ,, ERROR, , Ingress Abort:Oxid=0x:Abort for CH=0x. Probable Cause Indicates an abort operation has been received from a local FC interface for an emulation CH exchange. Recommended If there were associated IO errors at the same time as this event, contact your vendor's customer Action support for assistance. Severity ERROR FICN-1068 Message , [FICN-1068], ,, ERROR, , Ingress Abort:Oxid=0x:Abort for CU=0x. Probable Cause Indicates an abort operation has been received from a local FC interface for an emulaton CU exchange. Recommended If there were associated IO errors at the same time as this event, please contact your vendor's Action customer support for assistance. Severity ERROR FICN-1069 Message , [FICN-1069], ,, ERROR, , Emulation Configuration Error on TunnelId :. Probable Cause Indicates an error has been noted in the FICON configuration. Refer to the string for the nature of the configuration issue. Recommended If resolution of the configuration issue cannot be completed, contact your vendor's customer Action support for assistance. Severity ERROR Fabric OS Message Reference 199 53-1001157-01