HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 247

28 FICN-1030 Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's Action customer support for assistance. Severity ERROR FICN-1030 Message , [FICN-1030], ,, ERROR, , HostDiskIng:FICON Purge received:Path=. Probable Cause Indicates an active disk emulation device received a FICON Purge Path from the channel. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's Action customer support for assistance. Severity ERROR FICN-1031 Message , [FICN-1031], ,, WARNING, , HostDiskIng:FICON System Reset received on Path=. Probable Cause Indicates the FICON channel sent a System Reset to the disk control unit. Recommended No action is required. The MVS system was either set to IPL or performing error recovery. Action Severity WARNING FICN-1032 Message , [FICN-1032], ,, INFO, , HostDiskIng:XRC Read Channel Extender Capabilities detected on Path: . Probable Cause Indicates the XRC System Data mover was restarted to discover the capabilities of the channel extension equipment. Recommended No action is required. This is a part of the XRC initialization. Action Severity INFO FICN-1033 Message Probable Cause , [FICN-1033], ,, INFO, , HostEgr:Logical Path Established on Path=. Indicates the peer side FICON Control Unit has accepted a logical path establishment command sequence with the FICON channel. Fabric OS Message Reference 189 53-1001157-01