HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 597

92 ZONE-1041 Severity INFO ZONE-1041 Message , [ZONE-1041], ,, WARNING, , Unstable link detected during merge at port (). Probable Cause Indicates a possible unstable link or faulty cable. Recommended Check the SFP and cable at the specified port and verify that they are not faulty. Replace the SFP Action and cable as necessary. Severity WARNING ZONE-1042 Message , [ZONE-1042], ,, INFO, , The effective configuration has been disabled. . Probable Cause Indicates the effective zone configuration has been disabled. Recommended Verify that this zone configuration change was done on purpose. If no effective zone configuration Action is needed, no action is necessary. Severity INFO ZONE-1043 Message , [ZONE-1043], ,, INFO, , The Default Zone access mode is set to No Access. Probable Cause Indicates the Default Zone access mode is set to No Access. Recommended Verify that this Default Zone access mode change was done intentionally. Action Severity INFO ZONE-1044 Message , [ZONE-1044], ,, INFO, , The Default Zone access mode is set to All Access. Probable Cause Indicates that the Default Zone access mode is set to All Access. Recommended Verify that this Default Zone access mode change was done intentionally. Action Severity INFO Fabric OS Message Reference 539 53-1001157-01