HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 160

16 CVLM-1005 Probable Cause Indicates that encryption engine nodes in the cluster encryption group have different configurations. Recommended Synchronize the configuration in the cluster group using the cryptocfg --commit command. Refer to Action the Fabric OS Command Reference Manual for more information on this command. Severity WARNING CVLM-1005 Message , [CVLM-1005], ,, INFO, , Crypto service is on the switch. Probable Cause Indicates that the Crypto service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO CVLM-1006 Message , [CVLM-1006], ,, WARNING, , Crypto device in target container is not in AD0. Probable Cause Indicates that the crypto device in the crypto target container is not in AD0. Recommended Use the ad command to move the crypto device into AD0. Refer to the Fabric OS Command Action Reference Manual for more information on this command. Severity WARNING CVLM-1007 Message , [CVLM-1007], ,, WARNING, , Redirect zone update failure. Status is . Probable Cause Indicates that the redirect zone update failure. Recommended Issue the cryptocfg --commit command again. Refer to the Fabric OS Command Reference Manual Action for more information on this command. Severity WARNING CVLM-1008 Message , [CVLM-1008], ,, WARNING, , The member ( ) of HAC () is not in the fabric. 102 Fabric OS Message Reference 53-1001157-01