HP StorageWorks 8/80 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 179

17 EM-1068 EM-1068 Message , [EM-1068], ,, ERROR, , High Availability Service Management subsystem failed to respond. A required component is not operating. Probable Cause Indicates that the HA subsystem has not returned a response within four minutes of the request from the Environmental Manager. It usually indicates that some component has not started properly or has terminated. The specific component that has failed might be indicated in other messages or debug data. There are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Reboot or power cycle the switch. If the message persists, collect switch information using the Action supportsave command, and contact your switch service provider. Severity ERROR EM-1069 Message , [EM-1069], ,, INFO, , Slot is being powered off. Probable Cause Indicates a blade is being intentionally powered off. Recommended No action is required. Action Severity INFO EM-1070 Message , [EM-1070], ,, INFO, , Slot is being powered on. Probable Cause Indicates a blade is being intentionally powered on. Recommended No action is required. Action Severity INFO EM-2003 Message Probable Cause , [EM-2003], ,, ERROR, , has failed the POST tests. FRU is being faulted. Indicates that a field-replaceable unit (FRU) has failed the Power-On Self-Test. Refer to the /tmp/post[1/2].slot#.log file for more information on faults. To view this log file you must be logged in at the root level. The ID will be Switch for non-bladed systems. Fabric OS Message Reference 121 53-1001157-01