HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 Service Manual (A5 - Page 421

Event Number 0x4000 0x4001 0x4002 Event Description Priority Shell SysWipe Controller: Logged when a syswipe request is sent to the controller. This routine is not called by the controller SW or FW currently. If logged it means the command was entered through the shell interface. If this entry is seen a corresponding entry of MEL_EV_ICON_SYS_WIPE_ALT should also be logged by the alternate controller. Informational (0x0) NVSRAM Clear Sent to Alternate Controller: Logged when an NVSRAM clear message is sent to the alternate controller. This is normally logged as part of a mode select command to the RDAC mode page 0x2C. The companion entry of MEL_EV_ICON_NV_CLR_ALT should also be seen in the event log along with this entry. Informational (0x0) Shell SysWipe from Alternate Controller: Logged when a syswipe request is received by the alternate controller. This is an unexpected log entry that is logged when the routine iconMgrSendSysWipe is executed from the shell of the alternate controller. This routine is not called by the controller SW. The companion entry of MEL_EV_ICON_SYS_WIPE should also be logged if this entry is seen. Informational (0x0) Category Component Notification Controller (0x4) (0x8) Notification Controller (0x4) (0x8) Notification Controller (0x4) (0x8) Managing the Disk Array on HP-UX 421