HP rp7440 User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 114
Booting and Shutting Down Linux, Linux Support for Cell Local Memory
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
2. Check whether any users are logged in. Use the query user or query session command. 3. Issue the shutdown command and the appropriate options to shut down the Windows Server 2003 on the system. You have the following options when shutting down Windows: • To shut down Windows and reboot: shutdown /r Alternatively, you can select the Start -> Shut Down action and select Restart from the drop-down menu. • To shut down Windows and not reboot (either power down server hardware or put an nPartition into a shutdown for reconfiguration state): shutdown /s Alternatively, you can select the Start -> Shut Down action and select Shut down from the drop-down menu. • To abort a shutdown (stop a shutdown that has been initiated): shutdown /a For example: shutdown /r /t 60 /c "Shut down in one minute." This command initiates a Windows system shutdown-and-reboot after a timeout period of 60 seconds. The /c option specifies a message that is broadcast to any other users of the system. Booting and Shutting Down Linux This section presents procedures for booting and shutting down the Linux OS on cell-based HP Integrity servers and a procedure for adding Linux to the boot options list. • To determine whether the cell local memory (CLM) configuration is appropriate for Red Hat Enterprise Linux or SuSE Linux Enterprise Server, refer to "Linux Support for Cell Local Memory" (page 114). • To add a Linux entry to the nPartition boot options list, refer to "Adding Linux to the Boot Options List" (page 115). • To boot Red Hat Enterprise Linux, refer to "Booting Red Hat Enterprise Linux" (page 116). • To boot SuSE Linux Enterprise Server, refer to "Booting SuSE Linux Enterprise Server " (page 117). • To shut down Linux, refer to "Shutting Down Linux" (page 119). Linux Support for Cell Local Memory On servers based on the HP sx2000 chipset, each cell has a cell local memory (CLM) parameter, which determines how firmware interleaves memory residing on the cell. IMPORTANT: Red Hat Enterprise Linux does not support using CLM. Before booting Red Hat Enterprise Linux on an nPartition, you must ensure that the CLM parameter for each cell in the nPartition is set to zero (0). Although you might be able to boot Red Hat Enterprise Linux on an nPartition with CLM configured, any memory configured as cell local is unusable, and such a configuration is untested and unsupported. SuSE Linux Enterprise Server supports using CLM. The optimal CLM settings for SuSE Linux Enterprise Server depend on the applications and workload the OS is running. To check CLM configuration details from an OS, use Partition Manager or the parstatus command. For example, the parstatus -V -c# command and parstatus -V -p# command report the CLM amount requested and CLM amount allocated for the specified cell (-c#, where 114 Booting and Shutting Down the Operating System