HP rp7440 User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 163

Installation of Two Slimline DVD+RW Drives.

Get HP rp7440 PDF manuals and user guides View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 163 highlights

Installation of Two Slimline DVD+RW Drives. The HP Integrity rx7640 server can be configured with two slimline DVD+RW drives. Installation of the slimline DVD+RW drives requires that two core IO card sets are installed in the server. When the slimline DVD+RW drives are installed, the top drive is associated with cell 1 and the bottom drive is associated with cell 0. Installation of the slimline DVD+RW drives requires the following configuration of the data and power cables in the removable media drive bay. Removable Media Cable Configuration for the Slimline DVD+RW Drives Installation of the slimline DVD+RW drives requires that both SCSI data cables (Top DVD/DAT and Bottom DVD) and both power cables are installed into the removable media drive bay. For proper installation the power cables must be routed to the left of the data cables as shown in Figure 6-25. Figure 6-25 Data and Power Cable Configuration for Slimline DVD Installation Power Cables Data Cables: The Black Line Indicates the Correct Length. The following procedure provides information on configuring the removable media drive bay cables for use with the slimline DVD+RW drives. 1. If the cable configuration appears as shown in figure Figure 6-25 with two power cables and both the Top DVD/DAT and Bottom DVD data cables, proceed with the installation of the drives as described in "Installing the Slimline DVD+RW Drives" (page 165). 2. Turn off power and remove the top cover. 3. Move the SCSI cables on top of the mass storage backplane out of the way. 4. Move the removable media data cables out of the way. 5. Remove the metal removable media bay cover. 6. Unfold bends marked in orange and flatten the cable marked Bottom DVD. 7. Fold the Bottom DVD cable at green stripe then nest the Top DVD/DAT and Bottom DVD cables together and fold as shown in Figure 6-26. Removing and Replacing a Dual Slimline DVD Carrier 163

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
Installation of Two Slimline DVD+RW Drives.
The HP Integrity rx7640 server can be configured with two slimline DVD+RW drives. Installation
of the slimline DVD+RW drives requires that two core IO card sets are installed in the server.
When the slimline DVD+RW drives are installed, the top drive is associated with cell 1 and the
bottom drive is associated with cell 0.
Installation of the slimline DVD+RW drives requires the following configuration of the data and
power cables in the removable media drive bay.
Removable Media Cable Configuration for the Slimline DVD+RW Drives
Installation of the slimline DVD+RW drives requires that both SCSI data cables (
Top DVD/DAT
and
Bottom DVD
) and both power cables are installed into the removable media drive bay. For
proper installation the power cables must be routed to the left of the data cables as shown in
Figure 6-25
.
Figure 6-25 Data and Power Cable Configuration for Slimline DVD Installation
Data Cables:
The Black Line
Indicates the
Correct Length.
Power Cables
The following procedure provides information on configuring the removable media drive bay
cables for use with the slimline DVD+RW drives.
1.
If the cable configuration appears as shown in figure
Figure 6-25
with two power cables and
both the
Top DVD/DAT
and
Bottom DVD
data cables, proceed with the installation of the
drives as described in
“Installing the Slimline DVD+RW Drives” (page 165)
.
2.
Turn off power and remove the top cover.
3.
Move the SCSI cables on top of the mass storage backplane out of the way.
4.
Move the removable media data cables out of the way.
5.
Remove the metal removable media bay cover.
6.
Unfold bends marked in orange and flatten the cable marked
Bottom DVD
.
7.
Fold the
Bottom DVD
cable at green stripe then nest the
Top DVD/DAT
and
Bottom DVD
cables together and fold as shown in
Figure 6-26
.
Removing and Replacing a Dual Slimline DVD Carrier
163