HP rp7440 User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 164
Top DVD/DAT and Bottom DVD Cables Nested Together
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Figure 6-26 Top DVD/DAT and Bottom DVD Cables Nested Together Bottom DVD Cable Top DVD/DAT Cable Cables Nested Together 8. Insert the two power cables into the media bay so they are on the left side of the drive bay when viewed from the front of the system. 9. Carefully insert the SCSI cables into the media bay. The SCSI cables lay on top of the power cables previously inserted into the media bay. The SCSI cables must extend out of the drive bay so the black line on each cable aligns with the front of the chassis. The SCSI cables extend from the drive bay at different lengths. The cable terminators remain ouside of the drive bay in the top of the chassis. When correctly installed, the cables must be configured as shown in Figure 6-27. Figure 6-27 SCSI and Power Cables for Slimline DVD+RW Installation Power Cable Flag Indicator SCSI Cable Length Indicator 10. Carefully position the metal removable media cover over the SCSI data and power cables and fasten into place. CAUTION: Ensure the service length of the cables remains fixed as described in steps 7 and 8 when securing the removable media cover. Failure to comply will damage the removable media drives, data, and power cables. NOTE: The SCSI data cable end folds over the metal cover. The terminators sit on top of the metal removable media cover. 11. Connect the removable media power cables into the mass storage backplane connectors. 164 Removing and Replacing Components