HP rp7440 User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 168
Option ROM, Removing and Replacing a PCI Smart Fan Assembly
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
7. Exit SAM Option ROM To allow faster booting, system firmware does not auto-scan PCI devices with an Option ROM. In order to boot from a PCI connected device with an Option ROM, it must be added to the table of boot devices as follows: 1. Install the I/O card into the chassis. 2. Boot the server to the EFI shell. 3. Execute the EFI search command. To add a single card: search To add all cards: search all 4. Execute the following EFI command: map -r 5. Enter the Boot Manager by executing the following command: exit 6. From the EFI Boot Manager Menu, select "Boot Option Maintenance Menu" and then from the Main Menu, select "Add a Boot Option". Now add the device as a new boot device. Updating Option ROMs The Option ROM on a PCI I/O card can be "flashed" or updated. The procedure to flash an I/O card follows. 1. Install the I/O card into the chassis. 2. Boot the server to the EFI shell. 3. Execute the EFI search command. To add a single card: search To add all cards: search all 4. Execute the following EFI command: map -r NOTE: Each I/O card type and firmware image update may require a different flash utility and procedure. Follow the instructions in the .txt file included with the latest HP IPF Offline Diagnostic & Utilities CDROM. 5. Load the HP IPF Offline Diagnostic & Utilities CDROM. The CDROM will contain the flash utility for IO each card type, firmware images, and a .txt file that will include instructions and information about updating the firmware images. Removing and Replacing a PCI Smart Fan Assembly The PCI Smart Fan Assembly is located at the front of the PCI cardcage, toward the middle top portion of the server. The fan assembly is a hot swappable component. 168 Removing and Replacing Components