HP rp7440 User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 181
LVM-Maintenance Mode HP-UX Booting, of specifying one of
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Main Menu: Enter command or menu > BOOT 0/0/2/0/0.13 BCH Directed Boot Path: 0/0/2/0/0.13 Do you wish to stop at the ISL prompt prior to booting? (y/n) >> y Initializing boot Device. .... ISL Revision A.00.42 JUN 19, 1999 ISL> 3. From the ISL prompt, issue the appropriate Secondary System Loader (hpux) command to boot the HP-UX kernel in the desired mode. Use the hpux loader to specify the boot mode options and to specify which kernel to boot on the nPartition (for example, /stand/vmunix). • To boot HP-UX in single-user mode: ISL> hpux -is boot /stand/vmunix Example 7-1 (page 181) shows output from this command. • To boot HP-UX at the default run level: ISL> hpux boot /stand/vmunix To exit the ISL prompt and return to the BCH interface, issue the EXIT command instead of specifying one of the hpux loader commands. Refer to the hpux(1M) manpage for a detailed list of hpux loader options. Example 7-1 Single-User HP-UX Boot ISL Revision A.00.42 JUN 19, 1999 ISL> hpux -is /stand/vmunix Boot : disk(0/0/2/0/0.13.0.0.0.0.0;0)/stand/vmunix 8241152 + 1736704 + 1402336 start 0x21a0e8 .... INIT: Overriding default level with level 's' INIT: SINGLE USER MODE INIT: Running /sbin/sh # 4. Exit the console and management processor interfaces if you are finished using them. To exit the BCH environment, press ^B (Control+B); this exits the nPartition console and returns to the management processor Main Menu. To exit the management processor, enter X at the Main Menu. LVM-Maintenance Mode HP-UX Booting This section describes how to boot HP-UX in LVM-maintenance mode on cell-based HP 9000 servers. HP-UX for the HP Integrity rx7640 and HP 9000 rp7440 Servers 181