HP rp7440 User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 179

HP 9000 Boot Configuration Options, Booting and Shutting Down HP-UX, Standard HP-UX Booting, setboot

Get HP rp7440 PDF manuals and user guides View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 179 highlights

HP 9000 Boot Configuration Options On cell-based HP 9000 servers the configurable system boot options include boot device paths (PRI, HAA, and ALT) and the autoboot setting for the nPartition. To set these options from HP-UX, use the setboot command. From the BCH system boot environment, use the PATH command at the BCH Main Menu to set boot device paths, and use the PATHFLAGS command at the BCH Configuration menu to set autoboot options. For details, issue HELP command at the appropriate BCH menu, where command is the command for which you want help. Booting and Shutting Down HP-UX This section presents procedures for booting and shutting down HP-UX on cell-based HP 9000 servers. Standard HP-UX Booting Procedure 7-1 HP-UX Booting (BCH Menu) From the BCH Menu, use the BOOT command to boot the HP-UX OS. The BCH Menu is available only on HP 9000 servers. 1. Access the BCH Main Menu for the nPartition on which you want to boot HP-UX. Log in to the management processor, and enter CO to access the Console list. Select the nPartition console. When accessing the console, confirm that you are at the BCH Main Menu (the Main Menu: Enter command or menu> prompt). If you are at a BCH menu other than the Main Menu, then enter MA to return to the BCH Main Menu. 2. Choose which device to boot. From the BCH Main Menu, use the PATH command to list any boot path variable settings. The primary (PRI) boot path normally is set to the main boot device for the nPartition. You also can use the SEARCH command to find and list potentially bootable devices for the nPartition. Main Menu: Enter command or menu > PATH Primary Boot Path: 0/0/2/0/0.13 0/0/2/0/0.d (hex) HA Alternate Boot Path: 0/0/2/0/0.14 0/0/2/0/0.e (hex) Alternate Boot Path: 0/0/2/0/0.0 0/0/2/0/0.0 (hex) Main Menu: Enter command or menu > 3. Boot the device by using the BOOT command from the BCH interface. You can issue the BOOT command in any of the following ways: • BOOT Issuing the BOOT command with no arguments boots the device at the primary (PRI) boot path. • BOOT bootvariable This command boots the device indicated by the specified boot path, where bootvariable is the PRI, HAA, or ALT boot path. For example, BOOT PRI boots the primary boot path. HP-UX for the HP Integrity rx7640 and HP 9000 rp7440 Servers 179

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
HP 9000 Boot Configuration Options
On cell-based HP 9000 servers the configurable system boot options include boot device paths
(
PRI
,
HAA
, and
ALT
) and the autoboot setting for the nPartition. To set these options from HP-UX,
use the
setboot
command. From the BCH system boot environment, use the
PATH
command
at the BCH Main Menu to set boot device paths, and use the
PATHFLAGS
command at the BCH
Configuration menu to set autoboot options. For details, issue
HELP
command
at the appropriate
BCH menu, where
command
is the command for which you want help.
Booting and Shutting Down HP-UX
This section presents procedures for booting and shutting down HP-UX on cell-based HP 9000
servers.
Standard HP-UX Booting
Procedure 7-1 HP-UX Booting (BCH Menu)
From the BCH Menu, use the
BOOT
command to boot the HP-UX OS. The BCH Menu is available
only on HP 9000 servers.
1.
Access the BCH Main Menu for the nPartition on which you want to boot HP-UX.
Log in to the management processor, and enter
CO
to access the Console list. Select the
nPartition console. When accessing the console, confirm that you are at the BCH Main Menu
(the
Main Menu: Enter command or menu>
prompt). If you are at a BCH menu other
than the Main Menu, then enter
MA
to return to the BCH Main Menu.
2.
Choose which device to boot.
From the BCH Main Menu, use the
PATH
command to list any boot path variable settings.
The primary (PRI) boot path normally is set to the main boot device for the nPartition. You
also can use the
SEARCH
command to find and list potentially bootable devices for the
nPartition.
Main Menu: Enter command or menu >
PATH
Primary Boot Path:
0/0/2/0/0.13
0/0/2/0/0.d
(hex)
HA Alternate Boot Path:
0/0/2/0/0.14
0/0/2/0/0.e
(hex)
Alternate Boot Path:
0/0/2/0/0.0
0/0/2/0/0.0
(hex)
Main Menu: Enter command or menu >
3.
Boot the device by using the
BOOT
command from the BCH interface.
You can issue the
BOOT
command in any of the following ways:
•
BOOT
Issuing the
BOOT
command with no arguments boots the device at the primary (PRI)
boot path.
•
BOOT
bootvariable
This command boots the device indicated by the specified boot path, where
bootvariable
is the PRI, HAA, or ALT boot path.
For example,
BOOT PRI
boots the primary boot path.
HP-UX for the HP Integrity rx7640 and HP 9000 rp7440 Servers
179