Hitachi DZ-BD70AF Owners Guide - Page 135
to BD/DVD.
UPC - 050585224094
View all Hitachi DZ-BD70AF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Message Cause & Troubleshooting Reference page Check disc. A disc unusable on this camcorder may have been inserted or the disc may be damaged. Make sure that the type of disc is correct, and that the disc is not write-protected. 30, 105, 105 Check HDD. Check to see whether the HDD is write-protected. Otherwise, the HDD may be destroyed. 105 Control Information Scenes may have been edited on another device, etc. Error. Update the control information. 104 • Use another disc. • See *3 and *4 on p.139. - Disc error has occurred. • Use another disc. • See *3 and *4 on p.139. - • A mismatch in recording information may be caused when editing is done on another device. Format the disc or use another disc. 104 • Formatting the disc will erase all data on it. Disc error has • Disc error occurred during finalizing, and finalizing occurred. Finalizing failed. Replace the disc. 113 is not complete. • See *3 on p.139. Disc error has • Was the disc formatted on a PC, or formatting occurred. Format the interrupted? disc now? Choose "YES" to format the disc. Formatting the disc 104 will erase all data on it. • See *2 on p.139. Disc error has The disc may be dirty. occurred. Formatting Remove the disc and wipe off fingerprints, dust, etc., is not complete. before reusing it, or use another disc. This message may also appear if you insert a disc for which formatting was interrupted midway. In this case, try formatting the disc or use another one. 104, 153 Disc error has Disc error could have occurred during editing of scenes. occurred. Keep Disc Turn off the camcorder with the disc being used in it, inside & restart. connect AC adapter/charger, and then power the 37 camcorder again. Repair of scenes will be tried. Disc error has This message appears if a disc error has occurred during occurred. Turn the dubbing. power switch off Leave the disc inserted and turn the power off. Connect once and then set it the AC adapter/charger to the camcorder and set the 24 to "BD/DVD". power switch to "BD/DVD". The video file will be repaired. Disc error has This message will appear when a disc error occurs during occurred. the unfinalization process. Replace the disc. Unfinalizing is not 114 complete. Additional Information 135