Hitachi DZ-BD70AF Owners Guide - Page 144

Symptom Cause and Correction Reference page Poor playback picture. Was the image input from an analog VCR (VHS, 8 mm) and recorded? The problem may be improved if a VCR equipped with a - TBC circuit is used for playback. No sound. If you are viewing images on a TV, is the TV volume control set correctly? Adjust the TV volume. 110 Not displayed BD, DVD-RAM, DVD-RW(VR mode) recorded on this normally in the disc camcorder and edited on another device may not be navigation screen. displayed normally in the disc navigation screen. In this event, use "Update control info.". If too much time is required to display the HDD disc navigation screen, try the following (DZ-BD7HA). 1 Press DISC NAVIGATION, then press MENU. 2 Select "Disc setting" or "HDD setting" (for the HDD of DZ-BD7HA) by pressing '/(, then press the confirmation button. - The "Update control info." confirmation screen appears. 3 Select "YES" by pressing &, then press the confirmation button. Update of control information will begin. While "Updating..." is being displayed, a black screen may appear (and time may be required). (There are some BD/DVD which cannot be used even by following the above procedures.) The disc navigation If the inserted card contains more than 3,999 still screen does not show pictures, only 3,999 stills can be shown in the disc more than 3,999 navigation screen. However, it is possible to play back - stills from the more than 3,999 pictures. inserted card. Additional Information 144