Hitachi DZ-BD70AF Owners Guide - Page 64

Using the Separately, Sold Lenses to, Increase the Wide, Angle or Telephoto, Effect

Page 64 highlights

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R CARD Using the SeparatelySold Lenses to Increase the WideAngle or Telephoto Effect Use the tele-conversion lens (DZTL43 (separately-sold) to increase the telephoto effect, and the wideconversion lens DZ-WL43 (separately-sold) to increase the wide-angle effect. If you choose another model, make sure the filter diameter is 43mm and the screw pitch 0.75mm. Attaching the separately sold lenses Remove the lens cap from the conversion lens and attach the conversion lens to the camcorder 1 Conversion lens Notes • If you attach the DZ-TL43 conversion lens, the focusing range at the T (telephoto) side will be from approx. 9.84 feet (3 m) to infinity. • When the tele-conversion lens or wide-conversion lens is used, the white balance may not function depending on recording conditions. (Normally, the white balance will be automatically adjusted.) In this event, adjust the white balance manually (p.71). • When you zoom while the conversion lens is attached, the four corners of the screen may become a little dark or scratchy at the W (Wide) side. (The four corners may not be evenly dark.) • When changing lenses, be careful not to drop the camcorder. • Attaching a conversion lens will prevent you from using the flash. Turn the "Flash" setting to "Off" (p.74). • Some commercially sold conversion lens may not be compatible with this camcorder. Various Recording Techniques 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183

64
Various Recording Techniques
Attaching the separately
sold lenses
Using the Separately-
Sold Lenses to
Increase the Wide-
Angle or Telephoto
Effect
Use the tele-conversion lens (DZ-
TL43 (separately-sold) to increase the
telephoto effect, and the wide-
conversion lens DZ-WL43
(separately-sold) to increase the
wide-angle effect.
If you choose another model, make
sure the filter diameter is 43mm and
the screw pitch 0.75mm.
1
Remove the lens cap from the
conversion lens and attach the
conversion lens to the camcorder
HDD
BD-R
RAM
-RW (VR)
R
-RW (VF)
BD-RE
CARD
Conversion lens
Notes
If you attach the DZ-TL43
conversion lens, the focusing
range at the T (telephoto) side
will be from approx. 9.84 feet (3
m) to infinity.
When the tele-conversion lens or
wide-conversion lens is used, the
white balance may not function
depending on recording
conditions. (Normally, the white
balance will be automatically
adjusted.) In this event, adjust the
white balance manually (p.71).
When you zoom while the
conversion lens is attached, the
four corners of the screen may
become a little dark or scratchy at
the W (Wide) side. (The four
corners may not be evenly dark.)
When changing lenses, be careful
not to drop the camcorder.
Attaching a conversion lens will
prevent you from using the flash.
Turn the “Flash” setting to “Off”
(p.74).
Some commercially sold
conversion lens may not be
compatible with this camcorder.