IBM 326m Hardware Maintenance Manual - Page 68
Ethernet, RJ-45, connectors, Serial, connector, Universal, Video
UPC - 000435835093
View all IBM 326m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Ethernet (RJ-45) connectors The following illustration shows two Ethernet connectors. Activity LEDs Link LEDs 1 8 1 8 Connect Category 3, 4, or 5 unshielded twisted-pair cables to these connectors. The 100BASE-TX and 1000BASE-T Fast Ethernet standards require Category 5 or higher cabling. For more information about the Ethernet controller, see the User's Guide on the IBM Documentation CD. Eserver Serial connector Use a serial connector to connect a serial device. The following illustration shows a serial connector. 1 5 6 9 Universal Serial Bus connectors Use a Universal Serial Bus (USB) connector to connect a USB device. USB technology transfers data at up to 12 Mb per second (Mbps) with a maximum of 127 devices and a maximum signal distance of 5 meters (16 ft) per segment. Using Plug and Play technology, USB devices are configured automatically. The following illustration shows a USB connector. 12 34 Use a 4-pin cable to connect a device to a USB connector. If you need to connect more USB devices than the server has USB connectors for, use a USB hub to connect additional devices. Video connector Use this connector to connect a monitor to the server. The connector is dark blue to help you identify it. The following illustration shows a video connector. 5 1 15 11 58 326m Type 7969: Hardware Maintenance Manual and Troubleshooting Guide