IBM 326m Hardware Maintenance Manual - Page 76
guidelines
UPC - 000435835093
View all IBM 326m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
SCSI backplane Complete the following steps to remove the SCSI backplane. This component contains an "HDD BACKPLN" label. Note: v Read "Installation guidelines" on page 29. v Read the safety notices at "Safety information" on page 107. v Read "Handling static-sensitive devices" on page 30. 1. Turn off the server. 2. Disconnect all power cords and external cables from the back of the server. 3. Remove the server from the rack. 4. Pull out the hard disk drives. 5. Remove the server cover (see "Removing the cover and bezel" on page 32). 6. Disconnect the cables from the SCSI backplane. Retention notches Retention tabs 7. Gently pull up on the backplane until it is released from the server at the notches; then, pull the backplane out of the server. To replace the SCSI backplane, reverse the previous steps, making sure to align the tabs and notches. 66 326m Type 7969: Hardware Maintenance Manual and Troubleshooting Guide