IBM 326m Hardware Maintenance Manual - Page 92
code/symptom
UPC - 000435835093
View all IBM 326m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Note: See "System" on page 100 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 217-198-XXX (Could not establish drive parameters) 1. Check cable and termination. 2. SCSI backplane. 3. Hard disk drive. 217-XXX-000 (Failed BIOS hard disk drive test) Note: If RAID is configured, the hard disk drive number refers to the RAID logical array. 1. Hard disk drive 1 2. System board 217-XXX-001 (Failed BIOS hard disk drive test) Note: If RAID is configured, the hard disk drive number refers to the RAID logical array. 1. Hard disk drive 2 2. System board 301-XXX-000 (Failed keyboard test) v Keyboard v System board 302-XXX-000 (Failed mouse test) v Mouse v System board 405-XXX-000 (Failed Ethernet test on controller on the system board) 1. Verify that Ethernet is not disabled in BIOS. 2. System board. 405-XXX-00n (Failed Ethernet test on adapter in PCI slot n) 1. For n=0, system board 2. For n>0, adapter in PCI slot n 3. System board 405-XXX-a0n 1. For a = 0, system board (Failed Ethernet test on adapter in PCI slot a) 2. For a > 0, adapter in PCI slot a 415-XXX-000 (Failed Modem test) 1. Cable Note: Ensure modem is present and attached to server. 2. Modem 3. System board 82 326m Type 7969: Hardware Maintenance Manual and Troubleshooting Guide