Intel SBXD132 User Guide - Page 36
Installing an I/O-expansion Card
UPC - 735858189408
View all Intel SBXD132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing an I/O-expansion Card If I/O-expansion is supported by the SBCE unit in which the blade server is installed, you can add an I/O-expansion card to the blade server. An I/O expansion card provides additional connections for communicating on a network. The blade server supports various types of I/O expansion cards. See http:// support.intel.com/support/ for a list of available I/O expansion cards and their form-factor types. Make sure that the SBCE unit and the I/O modules to which the I/O expansion card is mapped support the network-interface type of the I/O expansion card. For example, if you add an Ethernet expansion card to a blade server installed in a SBCE unit, the I/O-modules in I/O-module bays 3 and 4 on the SBCE unit must both be compatible with the expansion card. All other expansion cards that are installed on other blade servers in the SBCE unit must also be compatible with these I/O-modules. In this example, you could then install two Ethernet switch modules, two pass-thru modules, or one Ethernet switch module and one pass-thru module. Because pass-thru modules are compatible with a variety of I/Oexpansion cards, installing two pass-thru modules would enable the use of several different types of compatible I/O-expansion cards on blade servers within the same SBCE unit. The following sections describe how to install an I/O-expansion card in the blade server. The illustrations show installation of the I/O-expansion cards in the system board: installing the cards in an expansion unit is similar. 28 Intel® Server Compute Blade SBXD132 Installation and User's Guide