Intel SBXD132 User Guide - Page 47
Intel® Blade Storage Expansion Module for the Intel® Server Compute Blade SBXD132, Installation
UPC - 735858189408
View all Intel SBXD132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
5 Intel® Blade Storage Expansion Module for the Intel® Server Compute Blade SBXD132 The Intel® Blade Storage Expansion Module for the Intel® Server Compute Blade SBXD132 is a redundant array of independent disks (RAID) storage device which can be installed on a blade server that supports Serial Attached SCSI (SAS) hard disk drives (see the Tested Hardware and Operating System List at http://support.intel.com/support/ to see if your blade server supports this expansion unit). The expansion unit has an intelligent RAID controller and cache memory that can support RAID level-0, level-1, and level-5 (depending on the model). It supports RAID configurations that use up to three hot-swap SAS hard disk drives in the expansion unit and up to two hard disk drives that are installed in the host blade server. The expansion unit also supports up to two I/O-expansion cards (standard-form-factor, and small-form-factor) to provide additional network connections and has a blade expansion connector that allows another expansion unit to be installed. Notes: • The illustrations in this document might differ slightly from your hardware. Intel® Blade Storage Expansion Module for Intel® Server Compute Blade SBXD132 Drive fillers Hot-swap hard disk drive AF000935 Installation Guidelines Before you install the expansion unit on a blade server, read the following information: • Read the safety information that begins on page vii and the guidelines in "Handling Static-sensitive Devices" on page 40. This information will help you work safely. • Observe good housekeeping in the area where you are working. Place removed covers and other parts in a safe place. Intel® Server Compute Blade SBXD132 Installation and User's Guide 39