Intel SBXD132 User Guide - Page 56
Removing the Expansion Unit, Cover on rack component; then
UPC - 735858189408
View all Intel SBXD132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
a. Shut down the operating system and turn off the blade server; then, remove the combined blade server and expansion unit from the SBCE unit (see the documentation that comes with the blade server for more information). b. Carefully lay the combined unit down on a flat, static-protective surface, with the cover side up. c. Remove the cover from the expansion unit (see "Removing the Expansion Unit Cover" on page 44). 3. Touch the static-protective package that contains the expansion card to any unpainted metal surface on the SBCE unit or any unpainted metal surface on any other grounded rack component; then, remove the expansion card from the package. 4. To install a small-form-factor expansion card, complete the following steps. Note: The following illustration shows how to install a small-form-factor expansion card in the rear connectors of the expansion unit; installing a card in the connectors closest to the front of the expansion unit is similar. Small-form-factor expansion card INPSRTAELSLSINHGERCEARWDHEN a. Locate the expansion-card connectors and orient the expansion card above them. b. Slide the notch in the narrow end of the card into the raised hook on the expansion-card bracket; then, gently pivot the card into the expansion-card connectors. 48 Intel® Server Compute Blade SBXD132 Installation and User's Guide