Intel SBXD132 User Guide - Page 42
Closing the Blade Server Cover, Attention
UPC - 735858189408
View all Intel SBXD132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Closing the Blade Server Cover Attention: You cannot insert the blade server into the SBCE unit until the cover is installed and closed or an expansion unit is installed. Do not attempt to override this protection. The following illustration shows how to close the blade server cover. Blade-cover release Blade-cover release AF000641 To close the blade server cover, complete the following steps: 1. Read the safety information beginning on page vii and "Installation Guidelines" on page 15. 2. If you removed the blade bezel assembly, replace it now (see "Installing the Blade Server Bezel Assembly" on page 33 for instructions). 3. If a Memory and I/O Expansion Blade is not installed on the blade server, make sure that the power jumper is installed in power connector J164. 4. Lower the cover so that the slots at the rear slide down onto the pins at the rear of the blade server, as shown in the illustration. Before closing the cover, make sure that all components are installed and seated correctly and that you have not left loose tools or parts inside the blade server. 5. Pivot the cover to the closed position, as shown in the illustration, until it clicks into place. 34 Intel® Server Compute Blade SBXD132 Installation and User's Guide