Intermec PB51 PB50 and PB51 Mobile Printer User Guide - Page 16
Understanding How to Use the Printer Buttons, Using the Mobile Printer - printer paper
View all Intermec PB51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 1 - Using the Mobile Printer Feed button Setup button SETUP: SER-COM Standby button Info button Ready-to-Work indicator Printer Control Panel: Use this illustration to familiarize yourself with the buttons and lights on the printer. Understanding How to Use the Printer Buttons Button Name Feed Button Setup Standby (Power) Info Function Press to advance label or receipt paper without printing. The amount of media advanced depends on the type of media loaded in the printer. The printer will advance 5 mm (0.2 inch), an entire label, or a configured length of media based on your media and settings. If you press and hold the button for longer than two seconds while in Ready mode, the printer performs a testfeed to calibrate the media (Fingerprint or ESC/P). If the printer is printing, press this button to start and stop Pause mode. Press to start and stop Setup mode (IPL and Fingerprint only). Press and hold to cancel printing (ESC/P only). Press to start Standby mode. In Standby mode, the radio, display, and backlight are turned off. Press to turn the printer on and start Ready mode. Press to show a summary of network connection settings and error conditions (Fingerprint and IPL only). Each information message appears on the screen for five seconds. Press in Pause mode to cancel the print job (Fingerprint and IPL only). The button does not have a unique function when using the ESC/P language. 4 PB50 and PB51 Mobile Printer User Guide