Intermec PB51 PB50 and PB51 Mobile Printer User Guide - Page 87

USB Interface, Connecting the Printer Through the, USB Interface

Get Intermec PB51 PDF manuals and user guides View all Intermec PB51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

Appendix A - Specifications The following illustration shows the PC end of the serial cable. 5 43 2 1 9 87 6 RS-232 Serial Cable DB9 Pins Serial Cable Pins and Description (PC End) Pin Signal 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Description Data carrier detect Receive data from host (input) Transmit data to printer (output) Data terminal ready Ground Data set ready Request to send from host (input) Clear to send from printer (output) Ring indicator USB Interface To use the USB interface to print from a PC, you need to install the Intermec InterDriver printer driver on your PC. For help setting up USB communications, see "Connecting the Printer Through the USB Interface" on page 30. The USB cable that ships with the printer has a USB Type A connector on one end to connect to the PC, and a USB Type B connector on the other end to connect to the printer. You do not need to configure communications for the USB port. PB50 and PB51 Mobile Printer User Guide 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Appendix A — Specifications
PB50 and PB51 Mobile Printer User Guide
75
The following illustration shows the PC end of the serial cable.
RS-232 Serial Cable DB9 Pins
USB Interface
To use the USB interface to print from a PC, you need to install the
Intermec InterDriver printer driver on your PC. For help setting up
USB communications, see
“Connecting the Printer Through the
USB Interface” on page 30
.
The USB cable that ships with the printer has a USB Type A connector
on one end to connect to the PC, and a USB Type B connector on the
other end to connect to the printer. You do not need to configure
communications for the USB port.
Serial Cable Pins and Description (PC End)
Pin
Signal
Description
1
DCD
Data carrier detect
2
RXD
Receive data from host (input)
3
TXD
Transmit data to printer (output)
4
DTR
Data terminal ready
5
GND
Ground
6
DSR
Data set ready
7
RTS
Request to send from host (input)
8
CTS
Clear to send from printer (output)
9
RI
Ring indicator
5
4
3
2
9
8
7
6
1