Intermec PB51 PB50 and PB51 Mobile Printer User Guide - Page 51

Configuring the Mobile Printer, PB50 and PB51 Mobile Printer User Guide

Get Intermec PB51 PDF manuals and user guides View all Intermec PB51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Chapter 2 - Configuring the Mobile Printer where xxxx is the unique username and the unique password for this protocol. 4 If you are using TTLS, you may need to send this command to set the TTLS outer name: ws,TTLS_USER, xxxx where xxxx is the outer name. 5 If you are using certificates for authentication, you may need the following commands. • Send the following commands to set a certificate and enable validation: ws,CA_CERT,c:/testCA.pfx@export ws,VALIDATE,ON where c:/testCA.pfx is the location and name of the certificate and export is the passphrase. • Send the following commands to set a common name for server 1 and server 2: ws, .SERVER_CN1,xxxxxxxxxx ws, .SERVER_CN2,xxxxxxxxxx where xxxxxxxxxx can be a value from 0 to 64 characters. • Send the following command to make sure your values match those used by the access point: wt,[variable name] All variables are returned with the exception of EAP_PASS, which always returns "****" if configured, and CA_CERT, which transmits the name of the last certificate authority successfully installed. An additional read-only variable for the supplicant state, called STATE, is also returned. • You may need to send the following command several times for the wireless station to connect: ws,ACTIVE,1 PB50 and PB51 Mobile Printer User Guide 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Chapter 2 — Configuring the Mobile Printer
PB50 and PB51 Mobile Printer User Guide
39
where
xxxx
is the unique username and the unique password for
this protocol.
4
If you are using TTLS, you may need to send this command to set
the TTLS outer name:
<STX><SI>ws,TTLS_USER,
xxxx
<ETX>
where
xxxx
is the outer name.
5
If you are using certificates for authentication, you may need the
following commands.
•
Send the following commands to set a certificate and enable
validation:
<STX><SI>ws,CA_CERT,
c:/testCA.pfx
@
export
<ETX>
<STX><SI>ws,VALIDATE,ON<ETX>
where
c:/testCA.pfx
is the location and name of the
certificate and
export
is the passphrase.
•
Send the following commands to set a common name for
server 1 and server 2:
<STX><SI>ws, .SERVER_CN1,
xxxxxxxxxx
<ETX>
<STX><SI>ws, .SERVER_CN2,
xxxxxxxxxx
<ETX>
where
xxxxxxxxxx
can be a value from 0 to 64 characters.
•
Send the following command to make sure your values match
those used by the access point:
<STX><SI>wt,[variable name]<ETX>
All variables are returned with the exception of EAP_PASS,
which always returns “****” if configured, and CA_CERT,
which transmits the name of the last certificate authority
successfully installed. An additional read-only variable for the
supplicant state, called STATE, is also returned.
•
You may need to send the following command several times for
the wireless station to connect:
<STX><SI>ws,ACTIVE,1<ETX>