JVC BR-DV6000U User Manual - Page 13
AUDIO MONITOR] switch, COUNTER] switch
UPC - 046838325557
View all JVC BR-DV6000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Memo ● For the MIX setting, noise is sometimes generated. If it occurs, set it to CH-1/2 or CH-3/4. ● In the 48 K audio mode, it is fixed at channels CH1 and CH2 regardless of the setting of the switch. 7 [AUDIO MONITOR] switch Use this switch to select the audio channel for output signals from the headphone terminal and the AUDIO MONITOR terminal located on the rear panel. The output signal of the AUDIO MONITOR OUT terminal is monaural. L : For outputting the sound of CH1. MIX : For outputting the mixed sound of CH1 and CH2. R : For outputting the sound of CH2. Memo In the following conditions, if this switch and the 6 AUDIO OUTPUT switch are used in combi- nation, the AUDIO MONITOR OUT outputs the sounds listed as in the following table. • During playback of tapes recorded in the 32 K audio mode • In the EE mode for DV input in the 32 K audio mode • During audio dubbing AUDIO switch MONITOR OUTPUT CH-1/2 L MIX CH-3/4 CH-1/2 MIX MIX CH-3/4 CH-1/2 R MIX CH-3/4 MONITOR OUT output channel CH1 CH1/3 mix CH3 CH1/2 mix CH1/2/3/4 mix CH3/4 mix CH2 CH2/4 mix CH4 8 [COUNTER] switch The switch changes the contents of the counter display of the 9 LCD and the monitor. CTL : It displays the counter in hour, minute, second and frame based on CTL (control signal). TC : It displays the time code data. UB : It displays the user's bit (UB). 9 LCD Ⅵ In the playback, still or search mode, it displays the playback image. In the recording, recording pause, stop, fast-forwarding or rewinding mode, it displays the input image. Ⅵ The following information is also displayed. • Various types of information (status display), e.g., operation mode, date/time, counter • Menu screen • Warning display (For details, ☞ Page 20) Memo ● Use the * DISP button to enable/disable the LCD display and the display style. ● LCD-related settings, e.g., brightness adjust- ment of the LCD, are performed in the DISPLAY MENU screen. (☞ Page 39 "Setting the LCD display") (☞ Page 82 "DISPLAY MENU screen") ● If the same image pattern is kept displayed on the LCD display for a prolonged period of time, "ghosting", the permanent etching of a pattern on a display screen, may occur. To prevent this, turn off the LCD display when it is not in use. 13